Alif Semiconductor /AE512F80F5582LS_CM55_HP_View /CANFD /CANFD_ACF_0_3_MASK

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as CANFD_ACF_0_3_MASK

AIDEE=Val_0x0, AIDE=Val_0x0, AMASK_X=Val_0x0

Description

Acceptance MASK Register

Fields

AMASK_X	Acceptance MASK 3. AMASK_X(10-0) will be used for standard frames. AMASK_X(28-0) will be used for extended frames. Disabled bits result in accepting the message. Therefore, the default configuration after reset for filter 0 accepts all messages. Only filter 0 is affected by the power-on reset. All other filters stay uninitialized. Refer to Section Software Reset. 0 (Val_0x0): Acceptance check for these bits of receive identifier enable 1 (Val_0x1): Acceptance check for these bits of receive identifier disabled
AIDE	Acceptance Mask IDE Bit Value. If the AIDEE = 0x1 then: Only filter 0 is affected by the power-on reset. All other filters stay uninitialized. Note: The AIDEE and AIDE bits can only be accessed if the CANFD_ACFCTRL[SELMASK] = 0x1. These bits can be used to accept only either standard or extended frames with the selected ACODE / AMASK setting or to accept both frame types. Only acceptance filter 0 is affected by the power-on reset and it is configured to accept both frame types after power-up. 0 (Val_0x0): Acceptance filter accepts only standard frames 1 (Val_0x1): Acceptance filter accepts only extended frames
AIDEE	Acceptance Mask IDE Bit Check Enable. Only filter 0 is affected by the power-on reset. All other filters stay uninitialized. 0 (Val_0x0): Acceptance filter accepts both standard or extended frames 1 (Val_0x1): Acceptance filter accepts either standard or extended as defined by this bit

Links

() ()